|
To order any product, put the quantity you want in the small box to the right.
When finished ordering on the page, to either continue shopping or move to the checkout, press the "SUBMIT ORDER for items on THIS PAGE"
button. You can return to this and other product pages at any time. We'll keep track of the items you have ordered. |
| . |
|
|
|
|
| Item |
Description |
Part # |
Price |
Order Qty. |
|
EQUILIBURR
19.5" Straight Diamond Burr with Vacuum for Key Tip Flex Shaft Machines
|
|
|
 |
The new 19.5" Equiliburr comes with a stainless steel base and aluminum cap, weighing 3.4 lbs. This greaseable unit with an internal dampening system is low profile and very smooth running. You no longer need burrs with a long shaft, just unscrew the old burr and replace it with a new one. The large vacuum tube prevents clogging. The unit comes with a vacuum tube cleaning squeegee. |
740-EQB |
$1525.00 |
|
| Replacement Burr |
720-TRDB |
$108.00 |
|
|
HEAVY DUTY RA-250 SERIES HORSEPOWER HANDPIECES |
The newest addition to the HorsePower hand piece line developed
by John Dipietro, CEqD is the Heavy Duty RA-250 Series. This hardy, easily maintained series
consists of five different units that have the same low profile (3/4) head. This low profile
head is extremely advantageous when trying to get at those hard to reach upper 11 buccal cusps
and points in the back of the horses mouth. Due to the engineering involved the hand pieces
do not support removable guards. Reports show that this unit works very well to dress the batteries
of teeth and reduce the height of protuberant teeth quickly and efficiently. Practitioners indicate
they have maintained the teeth on sixty to over two hundred head of horses with one diamond disk
depending on the amount of tooth being removed on a given individual. As with all HorsePower hand
pieces, the RA-250 is very tissue friendly. Available exclusively from World Wide Equine, Inc. and
their distributors. |
|
 |
18 Guarded RA-250 Horsepower Handpiece: This is the most versatile hand piece in
RA-250 series and works well in most positions on the cheek teeth. Comes with a 1 diamond disk, large hand piece, and non-changeable guard. |
RA-250 (Key Tip) |
$2416.00 |
|
| 18 Guarded RA-250 Horsepower Handpiece: (Same but with a square drive) |
RA-250 H (Square Drive) |
$2426.00 |
|
| 10 Guarded RA-250 Short Shaft Horsepower Handpiece: This guarded unit works well
for incisors, canine, and premolar bit seat work. Comes with 1 diamond disk, large dremel hand piece and non-changeable guard. |
RA-250 02 WG |
$2416.00 |
|
| Replacement Head Only |
RA-250 HEAD |
$1305.00 |
|
|
|
 |
18 Guarded RA-250 SD (small diameter head) Horsepower Handpiece: This 5/8 guarded
head of this hand piece works especially well for use on miniature or small headed horses.
Comes with a 5/8 diamond disk, large hand piece, and non-changeable guard. |
RA-250 SD |
$2416.00 |
|
|
|
 |
18 RA-250 NG (non-guarded) Horsepower Handpiece: This unguarded hand piece utilizes the
apple core burrs for buccal cusps, bit seats and radius work on cheek teeth battery edges. Comes
with a 5/8 x 1/2 diamond apple core burr and large dremel hand piece. |
RA-250 NG
(Key Tip) |
$2416.00 |
|
| 18 RA-250 NG (non-guarded) Horsepower Handpiece: (Same but with a square drive) |
RA-250 NG H (Square Drive) |
$2426.00 |
|
| 12 Unguarded RA-250 Short Shaft Horsepower Handpiece: This unit works well when
creating bit seats, rolling premolar edges, and rounding canine teeth. Comes with a 5/8" x 1/2"
diamond apple core burr, and large dremel hand piece. |
RA-250 SHORT SHAFT |
$2416.00 |
|
| Replacement Head Only |
RA-250 NG HEAD |
$1305.00 |
|
|
|
 |
18” Guarded RA-250 Large Diameter Head Horsepower Hand Piece: This is the most versatile hand piece in
RA-250 series and works well in most positions. Comes with a 1 1/4” diamond disk, large hand piece, and non-changeable guard. |
RA-250 LD |
$2416.00 |
|
| 18” Guarded RA-250 Large Diameter Head Horsepower Hand Piece: This comes with a 1 1/4" Burr and Square Drive. |
RA-250 H LD |
$2426.00 |
|
|
|
 |
18” Guarded RA-250 Water Induction Horsepower Hand Piece: This Horsepower hand piece uses water via a hand pump to cool the teeth during prophylactic and equilibration procedures. Hand pump included. |
RA-250 H2O |
$2815.00 |
|
| This kit includes all parts necessary to retro fit old style RA-250 hand pieces so they can utilize the water induction properties of the hand pump. |
RA-250 H2O Retro Kit |
$399.00 |
|
 | Hand Pump for the RA-250 Water Induction Horsepower Hand Piece |
RA-250 Hand Pump |
$105.00 |
|
 |
1 1/4" Diamond Disc for the RA-250
(Must have large guard) |
RA-250 2801 |
$109.00 |
|
 |
1" Diamond Disc for the RA-250 |
RA-250 2800 |
$100.00 |
|
 |
5/8" Diamond Disc for the RA-250 SD
(This is for the RA-250 with the small head ) |
RA-250 2800 SD |
$100.00 |
|
 |
Diamond Coated Apple Core Burr |
RA-250 2866 |
$100.00 |
|
 |
5/8" x 1/2" Diamond Coated Apple Core Burr with Ball |
RA-250 2866-CS |
$100.00 |
|
 |
1" x 5/8" Diamond Coated Apple Core Burr with Ball |
RA-250 2757 LB |
$100.00 |
|
 |
RA-250 1/8 Collet |
RA-250 COLLET |
$140.00 |
|
 |
1" x 1" Diamond Apple Core Burr |
RA-250 2756 |
$137.50 |
|
 |
Carbide Chip Apple Core Burr |
RA-250 2766 |
$100.00 |
|
 |
Deluxe Lube Gun for RA-250 |
RA-250 LUBE GUN DX |
$21.82 |
|
 |
Small Lube Gun for RA-250 |
RA-250 LUBE GUN SM |
$10.00 |
|
 |
Food grade lubricant for the RA-250 (4 oz. tube) |
RA-250 LUBE |
$7.00 |
|
|
LIGHT DUTY SPECIALTY HORSEPOWER HANDPIECE IC-300
This unit accepts all 1/8” shank burrs and can be modified for use with the large Foredom Handpiece. |
|
|
 |
Small Head Horsepower Hand Piece Unit includes a large dremel
hand piece, a collet and wrenches. Applications include finish work, drilling decaying cheek teeth,
and relief cuts on overlapping cheek teeth. |
IC-300 |
$1333.00 |
|
| Replacement head for the IC-300 |
IC-300 HEAD |
$500.00 |
|
| Replacement collet for the IC-300 |
IC-300 COLLET |
$91.67 |
|
|
FOREDOM SR SERIES |
 |
Flex shaft Foredom, 110 volt, 1/3 horsepower, 15,000 RPM, comes with TXR Foot control. |
710 TX-TXR |
$301.00 |
|
| Flex shaft Foredom, 110 volt, 1/3 horsepower, 15,000 RPM, comes with
SXR Foot control with cast iron housing. |
710 TX-SXR |
$320.00 |
|
Flex shaft Foredom, 110 volt, 1/6 horsepower, 15,000 RPM, comes with FCT Foot control with plastic housing. |
710 SR FCT |
$240.00 |
|
| Flex shaft Foredom, 230 volt, 1/6 horsepower, comes with plastic foot control. |
710 SR FCT 2CE |
$269.00 |
|
| Flex shaft Foredom, 1/6 horsepower, comes with cast iron foot control. |
710 SR SCT |
$266.00 |
|
| Flex shaft Foredom, 230 volt, 1/6 horsepower, comes with a cast iron foot control. |
710 SR SCT 230 |
$264.00 |
|
| Replacement Outer Sheath for TX |
710 7700 TX |
$14.00 |
|
Replacement Inner Shaft for TX |
710 9300 NC |
$16.00 |
|
| 66" Outer sheath for TX |
710 7766 TX |
$17.00 |
|
| 66" Non Conductive Inner Shaft Cable |
710 9366 NC |
$19.00 |
|
 |
Clutch Assembly for Foredom SR Machines
Complete Clutch Assembly is designed to prevent cable breakage and stop
the electrical shock of Foredom machines. |
710 Clutch SR |
$240.00 |
|
| Replacement Slip Clutch for the Clutch Assembly |
710 RC |
$50.00 |
|
 |
Large Heavy Duty Handpiece for Key Tip |
710 2500 |
$150.00 |
|
| Bearings for the Heavy Duty Large Foredom Handpiece |
710 2752F Bearings |
$17.50 |
|
| Foredom Flexible Shaft Grease |
710 LUBE |
$3.50 |
|
|
Large Key Tip Foredom Handpiece
1/4" and 1/8" Collets |
710 4400 |
$59.00 |
|
 |
Small Key Tip Foredom Handpiece
1/8" and 3/32" Collets |
710 2800 |
$59.00 |
|
|
FOREDOM TXH SERIES |
 |
Heavy Duty Flex shaft Foredom, 110 volt, 1/3 Horsepower, 15,000 RPM comes with TXR foot control. |
710 TXH-TXR |
$330.00 |
|
| Complete 60” cable assembly for the TXH series Foredoms comes complete with inner shaft & outer sheath. |
710 10816 TX |
$70.00 |
|
|
Clutch Assembly for Foredom TX Machines
Complete Clutch Assembly is designed to prevent cable breakage and stop
the electrical shock of Foredom machines. |
710 Clutch TX |
$240.00 |
|
| Replacement Slip Clutch for the Clutch Assembly |
710 RC |
$50.00 |
|
 |
Heavy Duty Large Foredom square drive hand piece for use with Foredom Series H or TXH units. |
710 2752F |
$155.00 |
|
| Bearings for the Heavy Duty Large Foredom Handpiece |
710 2752F Bearings |
$35.00 |
|
 |
Large Foredom square drive hand piece for use with Foredom Series H or TXH units. 1/4" and 1/8" |
710 2744 |
$60.00 |
|
| Foredom Flexible Shaft Grease |
710 LUBE |
$3.50 |
|
 |
Complete 61” cable assembly for the discontinued H series Foredoms comes complete with inner shaft & outer sheath. |
710 10816 H |
$70.00 |
|
|
AIR GUARD used with Foredom Small Key Tip Hand Piece |
 |
It accepts 1/8" mandrels and can be used with round or drum burrs and standard diamond cut off wheels for incisor, canine and bit seat work. The air guard can be attached to any standard vacuum system. |
710 Air Guard |
$142.00 |
|
|
TUNGSTEN CARBIDE 1/4" SHANK BURRS |
 |
1/2 x 5/8 Diamond Coated Apple Core Burr, 1/4 shank |
720 3004 |
$100.00 |
|
 |
5/8" Carbide Ball Burr, Regular Cut, 1/4" shank |
720 3001 |
$23.19 |
|
 |
5/8 Carbide Chip Ball Burr, 1/4 shank |
720 2757 |
$61.60 |
|
 |
5/8" x 1" Carbide Drum Burr, Master Cut, 1/4" shank |
720 3002 |
$34.47 |
|
 |
5/8" x 1" Carbide Drum Burr, Diamond Cut, 1/4" shank |
720 3003 |
$44.00 |
|
 |
5/8 x 1 Diamond coated Flat Nose Burr 1/4 shank (not coated on edge or end) |
720 5001 |
$100.00 |
|
 |
5/8 x 1 Diamond coated Flat Nose Burr 1/4 shank (coated on edge and end) |
720 5002 |
$100.00 |
|
 |
New 1" x 1" Concave Drum Burrs 46 grit with 1/4" x 1 1/2" shaft (no grit on end and
edge) |
720 2756 Concave |
$70.59 |
|
 |
New 1" x 1" Drum Burrs 46 grit with 1/4" x 1 1/2" shaft (grit on end and face) |
720 2756 Drum |
$57.75 |
|
 |
1 x 1 Diamond Apple Core Burr, 1/4 shank |
720 5101 |
$125.00 |
|
|
|
 |
5/8x 1 Double Cut bull nose burr, 6 long shank |
720 3006 |
$54.20 |
|
| 5/8”x 1” Double Cut bull nose burr, 12” long shank |
720 3012 |
$51.17 |
|
|
|
 |
5/8x 1 Diamond Cut bull nose burr, 6 long shank |
725 3006 |
$67.52 |
|
5/8”x 1” Diamond Cut bull nose burr, 12” long shank |
725 3012 |
$69.25 |
|
|
|
 |
5/8x 1 Diamond Coated Bull Nose Burr, 2 long shank |
720 4002 |
$100.00 |
|
| 5/8x 1 Diamond Coated Bull Nose Burr, 10 long shank |
720 4010 |
$123.34 |
|
| 5/8” x 1” Diamond Coated Bull Nose Burr, 12” long shank |
720 4012 |
$126.67 |
|
| 5/8” x 1” Diamond Coated Bull Nose Burr, 14” long shank |
720 4014 |
$133.34 |
|
|
TUNGSTEN CARBIDE 1/8" SHANK BURRS |
 |
1/2" Carbide Ball Burr, Diamond Cut, 1/8" shank |
720 2759 |
$18.20 |
|
 |
1/2" Drum Burr, Diamond Cut, 1/8" shank |
720 2760 |
$19.95 |
|
 |
1/2" Carbide Chip Ball Burr Regular Cut, 1/8" shank |
720 2758 60 |
$12.50 |
|
 |
1/2 x 5/8 Concave Burr 46 grit 1/8 shank |
715 2766 |
$71.00 |
|
 |
1/2x 5/8 Diamond Coated Apple Core Burr |
715 2769 |
$100.00 |
|
 |
1/8 diamond cut carbide burr for all Horsepower Handpieces |
RA-IC 2767 |
$12.00 |
|
 |
3 diamond cut carbide burr, used for vertical cuts across cheek teeth and
drilling, 1/8 shank for all Horsepower Handpieces |
RA-IC 2767 03 |
$12.00 |
|
 |
3/8 High speed cutter, 1/8 shank for all Horsepower Handpieces |
720 0199 |
$12.00 |
|
 |
Set of 12 Solid Carbide Miniature Burrs |
717 0012 |
$101.72 |
|
 |
Set of 9 Solid Carbide Miniature Burrs |
717 0009 |
$121.25 |
|
|
DIAMOND CUT OFF WHEELS |
 |
1" Double sided diamond cut off wheel with 1/8 shaft |
735 2738 |
$57.50 |
|
 |
1 1/8" Double sided diamond cut off wheel with 1/8 shaft |
735 2739 |
$57.50 |
|
 |
7/8" Double sided diamond cut off wheel with 3/32"mandrel |
735 2735 |
$52.00 |
|
 |
Deluxe Double sided diamond cut off wheel takes 1/8" mandrel |
735 2736 |
$66.00 |
|
 |
Heavy duty 1/8" Mandrel for deluxe diamond cut off wheel |
735 2737 |
$5.23 |
|
 |
Carbide sleeve for rubber mandrel |
715 2768 |
$41.25 |
|
 |
1/2 x 1/2 rubber mandrel 1/8 shank |
725 2764 |
$15.00 |
|
|
REPLACEMENT PARTS FOR VARIABLE SPEED HEAVY DUTY FLEX SHAFT DREMEL |
 |
Cable Housing |
700 Cable Housing |
$30.00 |
|
| Cable |
700 Cable |
$16.67 |
|
Replacement for Bearings only
(not pictured) |
700 2752 Bearing |
$35.00 |
|
|
CLUTCH ASSEMBLY FOR DREMEL MACHINES |
|
Dremel Clutch Assembly
Dremel machines equipped with this clutch must use Foredom Cables which are less expensive then the Dremel cables. If purchasing for a Dremel machine you must convert to Foredom Cable and housing.
|
700 CLUTCH |
$240.00 |
|
| Replacement Slip Clutch for the Clutch Assembly |
710 RC |
$50.00 |
|
|
SLENDER HAND PIECE GUARD FOR DREMEL OR FOREDOM |
 |
5" Slender Hand piece Guard for Dremel |
700 2751 SHG |
$62.00 |
|
| 5" Slender Hand piece Guard for Foredom |
710 2751 SHG |
$62.00 |
|
|
LARGE HAND PIECE GUARD FOR DREMEL OR FOREDOM |
 |
6" Large Hand piece Guard used with 5/8" burrs |
700 2752 LHG |
$62.00 |
|
| 6" Large Hand piece Guard used with 1" burrs |
700 2752 BG |
$62.00 |
|
|
